Tips For Maintaining Your Industrial Steel Wheels
If you want to make sure that you are not going to have to deal with a lot of problems with your industrial steel wheels, you will want to make use of the following tips. Also, by caring for them properly, you won't have to worry about dealing with the extra cost that would come from having to replace the wheels often.
Pay Attention To The Load Weight Limits
Even though they are made of steel, your industrial steel wheels will have load weight limits that you will need to adhere to. If you don't do this, you will be putting your wheels under too much pressure. The excessive amount of pressure could result in damage to the wheels or even complete failure of them. Should this cause the wheels to break and the cart to tip, you could lose merchandise, equipment, or supplies due to damages done to them when they fell. If you are not sure what the weight limits are, you can check with the manufacturer of the steel casters.
Replace Wheels With Matching Wheels
You might find that there will be an occasion when you need to replace just one or two of the steel wheels. When you do this, you need to make sure that the replacement wheels are an exact match to what is already in place. If you don't do this, you may be putting unnecessary strain on some of the wheels, causing them to malfunction. If you need to, you will simply need to replace all of the wheels so all of them match.
Check For Damage Weekly
Since the steel wheels are an important part of keeping everything that you are hauling safe, it is vital that you are doing a visual inspection of them at least once a week. Some of the problems you will want to look for include notching, pitting, radial cracking, and a worn out flange tip. If you notice any of these problems or others, you will want to have the steel industrial wheels replaced before that piece of equipment is used again. If you are not able to immediately replace the wheels, you will want to move it off to the side and mark it as being out of service. You can do that by taping a sign to it or wrapping caution tape around it.
When you make use of those tips, you will find that your industrial wheels will last a long time.